Uniquip Industries—PV Array Rotary DC Isolator
Rotary DC Isolator used in PV Array applications
GEN3DC-25, GEN3DC-32, SPMDCISO25, SPMDCISO32
What are the defects?
The products internal contacts may have a fault, where a high resistance connection may form.
What are the hazards?
There is a risk that the DC isolator may overheat and catch fire.
Dates available for sale
20th December 2012 - 1st March 2014
Where the product was sold
- Western Australia
Traders who sold this product
Sold through Electrical Wholesalers or direct to solar contractors / installlers
GWR PTY LTD Trading as Uniquip Industries
Supplier's web site
What should consumers do?
Shut down the system immediately by following the shut down procedure appearing on the label located in main switchboard or mounted near invertor. If you are unsure or cannot identify types of isolators you have, check operating manual or invoice. If you are still unsure contact the company who sold or installed the system for further advice.
You do not need a electrician to shut down the system, however you should seek assistance from a solar company if you are unsure of how to carry out the shutdown procedure safely.
The DC Isolators are required to be replaced. For a replacement program contact Uniquip by phoning 0457505122, emailing firstname.lastname@example.org or website http://www.uniquip.net.au/prp
Cease supplying GEN3 / SPM DC Isolators and arrange returns by contacting Uniquip by phoning 0457505122, emailing email@example.com or website http://www.uniquip.net.au/prp for further details.
For further information:
Please direct all questions to Uniquip by phoning 0457505122, emailing firstname.lastname@example.org or website http://www.uniquip.net.au/prp